Levō | LEVO laptop, tablet, and book floor stand. | Levō

Fast Delivery Times ------> [_Join our mailing list_](/content/pages/join-our-email-list-for-promos-and-news "Join Our Email List For Promos and News | LEVO Store"/index.html) for INSTANT PROMOS

What can we help you with?

Tablet Stand Questions

Will this hold a 12.9 inch iPad Pro and case?

Our Dual-Clamp Tablet Holder's maximum clamping capacity is 13.5 x 9.25 x .75 inches. It is on all our tablet stands except our Commercial Stand with Power and our Gooseneck Stands. Our dual clamp works with almost all tablets and their cases. For mobile phones, you can secure with two of the four clamping ends.

Can I use this on the left and right side of my furniture?

Yes, our stands are specifically designed for use on both the left and right sides of your furniture.

Will the Clamp-on Tablet Stand work with my table?

While most clamps require a tabletop overhang of up to 2 inches, our patent-pending "V" clamp can attach to corners of tables less than 1.6 inches with overhangs as little as 1/4 of an inch allowing you to clamp on to nearly any table or counter in the home or office.

Can I use this while laying completely flat on my back?

Yes, our dual cradle tablet holder on all of our tablet stands can pivot to face the ceiling, the ground, and any angle in between.

Book Stand Questions

Will this hold books heavier than four pounds?

Our Deluxe Book Stand is designed to hold books weighing four pounds or less. The horizontal arm can support up to seven pounds. For books weighing more than four pounds, we recommend adding a counterbalance to the base of the stand to prevent it from tipping.

How do you turn the pages?

Our G2 Book Holder Floor Stand's Book Platform Kit has spring-loaded page holders that you lift to release the page to turn them. Below is a video demonstrating one-handed page turning.

One Handed Page Turning Video

Can I use this while laying completely flat on my back?

Yes, our Book Platform Kit can pivot all the way forward so you can use it while lying completely flat on your back. You may consider ordering another set of page holders found at the link to keep all four corners of your book flat when using it supine.

Page Holder Set

Can this stand be used on either side of my furniture?

Yes, our stands are specifically designed for use on both the left and right sides of your furniture

Laptop Stand Questions

What is the difference between the V16 and Deluxe Laptop Stands?

The specs best illustrate the many differences between our V16 and Deluxe Laptop Stands. The most important buying decision comes down to your furniture and the features on our stands that will or may not work with where you want to use your LEVO.

The height of the base is an essential factor. Can you fit it under your furniture? They are both 3 ¾ of an inch high. If not, some of our customers choose to buy furniture risers. However, depending on where you want to position your stand, clearance may not be needed.

The maximum vertical height for both stands is 45 inches.

The horizontal arm on our V16 Laptop Stand is 15" and swings over inside the angle of its V-shaped base. This serves as a counterbalance and is approximately 90 degrees.

Our Deluxe Laptop Stand 801's 18" horizontal arm swings 360 degrees on its vertical post.

Both come with a mouse tray and can accommodate books, tablets, phones, etc., as accessories; only our Deluxe Laptop Stand 801can hold both a laptop and a tablet on the same stand with our new dual-arm (coming soon).

Will your laptop stands hold my 17 inch laptop?

Our laptop stands are designed to hold laptops up to 16 inches and up to five pounds.

I need a laptop stand and a tablet stand. Do I have to buy both?

Our Dual Clamp tablet holder is compatible with all our laptop stands. These mounts are interchangeable, but we are designing a dual arm for our Deluxe Laptop Stand 801 so you can mount both devices simultaneously.

Accessory Questions

Can the mouse tray be used on the right and left side of the desktop tray?

Yes. Two receptacles are on the back of the desktop tray for left and right positioning. (One is for a phone holder, and the other is for a mouse tray )You can choose which side to mount these holders. The mouse tray is secured with a turn knob.

Can I use the laptop tray on my G2 Deluxe Tablet and Book Stand?

Attaching our desktop trays to our Deluxe Tablet and Book Stands is unsafe. Our laptop stands are specially designed to support laptops safely. Below is a side-by-side comparison of both stands.

Does the mouse tray tilt?

Yes, and can be adjusted with a turn knob. Our mouse tray has a small ledge around its border to help prevent the mouse from sliding off. The mouse tray should be used horizontally as no locks are securing your mouse to the mouse tray.

What is the difference between your book kit and your book platform kit?

Our Book Kit, item 33715, is compatible with our V16 Laptop Stand, item 33742. The kit has two-page holders, two Velcro straps, and two-page plates. You attach this kit to the desktop tray, and you can leave it connected to the tray when using your laptop. The page holders are specially designed to collapse out of the way when using your laptop. Simply remove your laptop when you would like to attach your book. It is not compatible with our Gooseneck Tablet Stand.

Our Book Platform Kit, item 33701, is designed as an interchangeable mount for our tablet stands and our Deluxe Laptop Stand 801. It is not compatible with our Gooseneck Tablet Stand.

What is the difference between PRO Ends and Security Ends

LEVO Tablet Holder Clamp Specifications

Our tablet holders and all tablet stands excluding our Commerial Stand with Power come equipped with Pro Ends—rubberized grips that securely hold your device and can be easily removed or replaced with Security Ends if a more secure fit is preferred.

Each clamp (horizontal and vertical) features its own minimum and maximum range. See below for detailed measurements.

🔧 Pro Ends

Adjustable Clamp Range:

• Short Side: 5 1/8" to 9 3/8"

• Long Side: 7 5/8" to 13 1/2"

Maximum Device Depth: 3/4"

🔐 Security Ends (LEVO Dual Clamp Tablet Cradle)

Adjustable Clamp Range:

• Short Side: 4 5/16" to 8 5/8"

• Long Side: 7" to 13"

Maximum Device Depth: 13/16"

Will the PRO or Security Clamping Ends work with my dual clamp tablet holder?

Please check for compatibility before ordering. Most of our tablet stands purchased before 2018 have connection style A.

LEVO Security and PRO Clamping Ends will not work on clamps seen in image A. They will work on those in image B. You will need to remove the clamping ends to confirm compatibility. Follow or cut and paste the link below for a video on how to change the ends: https://www.dropbox.com/scl/fi/kp7kx1klr0lg4rjsubxej/35411_ProClampingEndsInstallation.mov?rlkey=4zjer5e8l6py4qg29dvy194is&e=1&st=cnhq9cm0&dl=0

Technical Details At A Glance

Which stand will work best for me?

If you would like your stand to hold your laptop, you must choose from our laptop stands, as they were designed to hold laptops. You can add accessories to hold tablets and books. If you do not need your stand to hold a laptop, you can choose from our tablet or book stands.

33742 - V16 Laptop Stand

How can I tighten the height adjustment levers?

How do I attach the laptop's safety cord to the desktop tray?

Please note that while the desktop tray shown in the images may differ slightly from your model, the process for attaching the safety cord remains the same. The V-16 is a lightweight stand, so a lighter laptop tray was provided for optimal compatibility.

Prepare the Metal Flip Bracket

Open the metal flip bracket, as shown in the second image. Once open, close it again temporarily to secure the cord in place.

Insert the Cord into the Tray

Thread the cord through the designated holes on the top of the laptop tray.

Secure the Cord

Flip the metal bracket open to prevent the cord from slipping back through the holes, as illustrated in the third image.

Position the Plungers

Place the plungers at the apex where your laptop screen meets the keyboard.

Important Safety Note

Do not close your laptop screen while the cord is in place on the stand. Doing so may damage the cord or your laptop.

33761 - Deluxe Laptop Stand 801

My vertical pole is slipping down. How can I fix the height locks so they work?

My desktop tray on my laptop stand is tilting and will move correctly. Can you help?

Sometimes the U-bracket is positioned in a way that prevents the tray from tilting or swiveling properly—both issues can be easily corrected.

Below is an image of the underside of our desktop tray. The white piece is the U-bracket, and the tray tilts on the hinges indicated by the red arrows. The leveling knob should be positioned on the inside of the U-bracket and must pass through two aligned holes: one on the white U-bracket and another on the adjacent metal piece highlighted in yellow.

In many cases, the knob is inserted from the wrong direction or the bracket has been rotated, preventing it from passing through both holes. This can be adjusted manually by repositioning the bracket so the knob aligns properly.

Also, part 0098 is the main shaft knob that connects the desktop to the stand's horizontal arm. If that becomes loose, it can cause left and right tilting and may need to be tightened.

How do I attach the laptop safety cord to the desktop tray?

Instructions for Using the Laptop Tray with the Safety Cord

33773 - UL Listed Commercial Tablet Stand (with USB-C Power)

The slide lock on my tablet holder is not working. Can you help?

Our Commercial Tablet Stand has two locks on the back of the tablet holder. One is a slide lever to lock and unlock the arms of the tablet holder and the other is a push button antitheft lock. If the push button lock is pushed in, the slide lever will be locked. You will need to unlock the push button lock with the tubular provided keys. If you have lost your keys, we offer them in this set. Click [KEYS](/content/products/key-for-dual-clamp-2-pack-part-0049?_pos=1&_sid=d72c97865&_ss=r "KEYS"/index.html)

My power is not working on my stand. Can you help?

Cable Connections: Please ensure all cables are connected correctly, as shown in your owner's manual.
AC Cord Fit: Check that the AC cord is fully inserted into the base. If it feels loose or does not fit snugly in the receptacle, let us know.
USB Insertion: It’s normal for the USB plug not to insert fully into the port—it should stay in place when the stand is stationary and not fall out on its own.
Wall Outlet: Confirm that the wall outlet you're using is working properly.
USB Cord Compatibility: This is a 60W High-Speed USB charger. Make sure your USB cord is rated to handle this level of power.
Power Indicator: Once everything is connected and the stand is plugged into a working outlet, look for a blue light under the USB charging port on the underside of the horizontal arm. If you see the blue light, power is running through the stand. If your device still isn’t charging, your USB cord may not be compatible.
If you see the blue light and are using an Apple iPad

We also want to make you aware of an Apple setting that can sometimes affect charging through USB-C accessories. Certain iPadOS updates and security settings can cause an iPad to restrict a connected USB-C accessory even when power is present and the stand itself is functioning normally.

Once you receive the new cable, please try the following:

Unlock your iPad.

Go to Settings → Privacy & Security → Wired Accessories.

Temporarily select “Always Allow.”

Disconnect the USB-C cable from the iPad and reconnect it.

If the iPad still does not charge, please also test the same USB-C cable and power adapter directly with the iPad, bypassing the stand. If the iPad charges directly, that helps us determine whether the issue is related to the iPad’s USB-C accessory recognition or power negotiation rather than a failure of the stand itself.

USB-C charging involves communication between the iPad, cable, power source, and connected accessory, so having power present does not always mean the iPad will automatically accept the charging connection.

Please let us know what happens after you try the new cable and these steps. We are happy to continue troubleshooting with you.

The horizontal arm is locked. How can I fix this?

Per UL Listing requirements the horizontal arm on this stand is locked to protect the internal wires. The arm articluates at the elbow.

Q: How can I tilt the tablet holder downward to use it while reclining?

The roll joint on our Dual Clamp Tablet Holder may feel stiff when pivoting it downward for the first time. Don’t hesitate to use firm pressure—it’s designed to handle it without breaking! We intentionally asked our factory to make the pivot tight to ensure stability, but it will ease up with use. Rest assured that a three-year warranty covers your LEVO for added peace of mind.

33768 - Deluxe Tablet Stand

How can I tighten the height adjustment levers?

CLICK HERE FOR Owner's Manual

How can I tighten the tablet holder? It slowly pivots down towards the ground.

33764 - Clamp-on Tablet Stand

33750 - V16 Tablet Stand

Can you tighten the height locks? My pole is slipping down.

LBH - Deluxe Book Stand

How can I tighten the height adjustment levers so my vertical pole locks?

Owner's Manuals

Casters

Please let me know which casters fit my stand?

To determine which casters you need, please refer to the information below. You can also email a photo of your stand from top to bottom to sales@levostore.com.

We have been manufacturing LEVO stands since 1998 and have made many modifications over the years, so a full photo of your stand will help us identify the correct casters for your model.

G2 Deluxe Stands-These stands have height adjustment levers you open and close to raise and lower the vertical post.

If your LEVO uses a turn cap that attaches the vertical column to the base, you will need 8 mm casters. This is the diameter of the stem. This is part # 0011. https://levostore.com/products/caster-for-tablet-levo-stands?_pos=1&_sid=476ec5c74&_ss=r

If your LEVO uses a big metal bolt that attaches the vertical column to the base, you will need 11 mm casters. This is part # 0071. https://levostore.com/products/locking-casters-for-levo-laptop-workstation?variant=40886179463237

If your LEVO uses a big metal bolt and your stand has USB charging capabilities, you will need our Commerical casters. This is part # 0103. https://levostore.com/products/caster-2-inch-industrial-with-lock-11mm-d-shaft?_pos=1&_sid=902391ee7&_ss=r

If you have a Gooseneck Stand you will need 11 mm casters. This is part # 0071. https://levostore.com/products/locking-casters-for-levo-laptop-workstation?variant=40886179463237

If your LEVO has a V shaped base you will need 11 mm casters. This is part # 0071. https://levostore.com/products/locking-casters-for-levo-laptop-workstation?variant=40886179463237

G1 Stands- These stands are our original series and have a Shepards Hook at the top of the vertical post. These stands use 8.0 mm casters. This was part # 0011: https://levostore.com/products/caster-for-tablet-levo-stands?_pos=1&_sid=476ec5c74&_ss=r

33707- Dual Clamp Tablet Holder

Will the dual cradle tablet holder fit on my stand?

Our Dual Clamp Tablet Holders are compatible with our G2 Stands. Our first stands were G1s. They are not compatible with our dual-clamp tablet holders. G1 Stands use a height adjustment turn knob to raise and lower the height, and the top of the vertical post had a Shepard's Hook. G2 Floor Stands use height adjustment levers that you open and close to adjust the height.

How will I know if my tablet and case will fit?

Our dual-clamp tablet holder supports almost all tablets and cases. Two of the four clamping ends can be used for smaller tablets, such as cell phones and Kindle Minis. The holder holds tablets 5 1/8 to 9 3/8 on the short side and 7 5/8 to 13 ½ on the long side. The maximum depth is ¾ of an inch.

Others have chosen to use two sided gummy tape (extra strength) or Velcro.

Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device

Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.

[Back to the top](/content/apps/help-center# "Back to the top"/index.html)

Shopping Cart

No products in the cart.

Keep Shopping

levostore.com

levostore.com is blocked